Weltweite Homologation
Experten für Typenzulassung


Kanada

Radio Type Approval, Homologation, Certification Services - Für weltweiten Marktzugang

Wir bieten Ihnen zuverlässig alle Servicedienstleistungen im Bereich Funk Zulassung, Radio Type Approval, Homologation, Certification Services in Canada (Ottawa) an. Unser guter Kontakt zur Behörde in Canada (Ottawa), insbesondere zu Innovation, Science and Economic Development Canada (ISED), sowie die Kompetenzen im Bereich Homologation von Funk- Produkten und Short Range Devices (SRD) aus dem Consumer- als auch dem Automotive-Sektor im ISM-Frequenzband werden Ihren Marktstart in Canada reibungslos und kosteneffektiv gestalten.

Um Ihr Produkt erfolgreich auf den Markt zu bringen, bieten wir Ihnen den folgenden Service an:

  • Erörtern der geltenden Anforderungen für Ihr spezifisches Produkt oder Ihre technische Ausrüstung, damit diese(s) die aktuellen Regularien in Bezug auf Safety, EMC, Wireless, etc. erfüllt
  • Gewährleisten von vorbereitenden Konformitätsprüfungen während der Design- und Entwicklungsphase um die Konformität zu bestimmen
  • Assistieren bei der Vervollständigung von Anträgen und anderen notwendigen Formularen
  • Durchführung von Tests in unseren akkreditieren Laboren oder in Ihren qualifizierten Einrichtungen, um CB Test Reports und Zertifikate mit gültigen nationalen Anforderungen und anderen Test Reports für Wireless etc. auszustellen
  • Abwicklung des kompletten Prozesses, einschließlich der Zusammenarbeit mit lokalen Test-und Zertifizierungs-Organisationen
  • Anordnen der einleitenden Erstprüfungen, die erforderlich sind, um das Zertifikat zu erhalten
  • Koordinierung von Verifizierungsprüfungen für die zugelassenen Produkte, wenn gewünscht
  • Unterstützung und Beschleunigung des Projektfortschritts mit Unterstützung des lokalen IB-Lenhardt AG - Teams und/oder Partners
  • Unterstützung bei der Wartung und Erneuerung der Zertifikate, wenn gewünscht
  • Übersetzung der Bedienungsanleitung als Kundenservice, wenn gewünscht 


Für Canada können wir Ihnen innerhalb kurzer Zeit ein Angebot auf Grundlage eines Datenblattes unverbindlich erstellen:
quote@ib-lenhardt.de



GEO / MAP von Canada


Allgemeine Informationen zu Canada

Formaler Name
Canada


Hauptstadt
Ottawa


Kontinent
North America


Breitengrad
61.41245384623751


Längengrad
-103.88450617983398


Währung
Canadian Dollar


Ländervorwahl
+ 1


Top-Level-Domain
.ca


Sprachen
English, French (both official)


Größe (in km²)
9,984,670.0 km²


Population (Stand 2011)
34482779 Einwohner


UN - Eintrittsdatum
09.11.1945


Ländercode nach ISO 3166-2
CA


Ländercode nach ISO 3166-3
CAN


Beispiel-Zertifikat für Canada

Beispiel Funk-Zulassungszertifikat für Kanada
Download Certificate
PDF / JPG



Obligatorisch / Freiwillig
Obligatorisch

Amt / Aufsichtsbehörde
Innovation, Science and Economic Development Canada (ISED)

Gültigkeitszeitraum der Zertifizierung
Unbegrenzt
If applicable rules are changed in the future, a re-evaluation might be necessary.

Lokaler Repräsentant erforderlich?
Ja

Tests im Land erforderlich?
Nein

Durchschnittliche Dauer für Funk-Zulassungen
10 Wochen

Label Beispiel für Canada

Beispiel Funk-Zulassungslabel für Canada
Download Label
PDF / PNG



Kennzeichnung des Zertifizierungs-Logos oder der Zertifizierungs-Nummer erforderlich?
Ja

Größe
mm

Bestimmte Anforderungen im Handbuch?
Ja

Beispiel Funk-Zulassungslabel für Canada
Download Label
PDF / PNG



Kennzeichnung des Zertifizierungs-Logos oder der Zertifizierungs-Nummer erforderlich?
Ja

Größe
mm

Bestimmte Anforderungen im Handbuch?
Ja

Neuigkeiten in Canada


  • IBL-Lab GmbH now recognized as a wireless testing lab by ISED

    As a result of the successful listing of IBL-Lab GmbH by the Innovation, Science and Economic Development Canada (ISED),
    we are now able to strongly assist our customers in obtaining the desired market access to the Canadian market. ISED Recognition Letter


  • ISED Supplementary Procedure to Radio Standards Specification

    The Department of Innovation, Science and Economic Development Canada opens a public consultation on the newly drafted RSS-102 SPR-004 “Time-Averaged Specific Absorption Rate (TAS) Assessment Procedures for Wireless Devices Operating in the 4 MHz – 6 GHz Frequency Band”. The SPR, supplementary procedure to radio standards, defines the general test methods for the RF Exposure compliance assessment for wireless devices operating in the frequency range 4 MHz to 6 GHz based on time averaging methods. 

    The consultation is open until February 23rd, 2021 using the link as below.

    Downloadlink


  • public consultancy on the 6GHz license exempt frequency band

    Until January 19th 2021 the ISED opened a consultation on the technical and policy framework for license-exempt use in the 6 GHz frequency band. The opening of the 6 GHz band is considered as priority one and especially the prominent role of WiFi is emphasized. The ISED is proposing the establishment of new spectrum for license-exempt Radio LAN operation in the frequency band 5925 - 7125 MHz with a maximum output power of 36 dBm EIRP.

    Further details are included in the consultancy document which may be found here


  • ISED published ICES-003 Issue7

    The newest edition of the Information and Technology Equipment standard ICES-003 was released by the ISED on October 15th 2020. 
    Newly added to the Issue 7 of the standard were the requirements for devices with wireless power transfer functionality and the removal of alternative limits. Issue 7 is including only one set of limits now.
    Inquiries regarding this release may be addressed directly to ISED using the general inquiry form (http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/frm-eng/EABV-9X4GEH) or via email to  ic.consultationradiostandards-consultationnormesradio.ic@canada.ca
     

  • Time-Averaged Specific Absorption Rate (TAS) Protocol

    The ISED in Canada as of April 20th, 2020 specified the certification requirements for the use of time-averaged specific absorption rate protocols to show compliance of radio devices with the RF Exposure requirements as defined in the applicable Canadian standard RSS-102. The Notice 2020 – DRS0007 allows the use of dynamic power level management to control the specific absorption rate of devices (SAR) over a specific time period and defines the specific requirements to be met before such an approach may be used. Those restrictions include but are not limited to a consultation with the ISED prior to seeking certification, a pre-approval of the time averaging protocol used and the time-averaging period and methodology.

    The issuance of the notice was necessary because of the lack of standardized test methods and protocols to cover this new evolvement in the development of transmitting devices.

    Please note that the necessary testing must be performed at a ISED recognized testing laboratory.

    Source: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/tt00132.html


  • Consultation of ICES-001

    The Department of Innovation, Science and Economic Development Canada is seeking comments on the following CONSULTATION: ICES-001, issue 5, “Industrial, Scientific and Medical (ISM) Equipment” sets the minimum requirements applicable to industrial, scientific and medical (ISM) equipment. These requirements include limits for and methods of measurement of radiated and conducted radio frequency emissions produced by ISM equipment, as well as administrative requirements applicable to such equipment.

    Consultation of ICES-001, Issue 5, Industrial, Scientific and Medical (ISM) Equipment ( available in English and French)

    Comments are due no later than March 20, 2020.

    English  Version: https://www.rabc-cccr.ca/consultations/open/

    French Version: https://www.rabc-cccr.ca/fr/consultations-fr/consultations-en-cours/

     

     


  • New Requirements for Wireless Device Testing Laboratories

    Since 15th of March 2019 the Innovation, Science and Economic Development of Canada (ISED) has published the "Decision on New Requirements for Wirelees Device Testing Laboratories".

    The increasing complexity of the equipment and the intricacies of the regulatory requirements demand more technical expertise from stakeholders involved in the conformity assessment process. Accredited testing laboratories (by ISED) generally submit higher quality test reports, therefore providing greater confidence in the competencies of these testing laboratories to perform compliance assessments to domestic technical rules.

    Here the link of the Decision: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf11322.html

     


  • New standard specifications

    The Innovation, Science and Economic Development Canada (ISED) has published new radio standards specification (RSS-130 Issue 2 replacing Issue 1) for equipment operating in the frequency bands 617-652 MHz, 663-698 MHZ, 689-756 MHz and 777-787 MHz.

    The main changes are listed below:

    • Add the frequency bands 617-652 MHz and 663-698 MHz and the related requirements to the standard.

    • Add a provision for a transition period regarding RSS-130 issue 1.

    • Change equipment’s equivalent isotopically radiated power (e.i.r.p.) to effective radiated power (e.r.p.).

     • Clarify that the equipment’s unwanted emission limit shall be met at the highest and lowest frequency of the frequency block range that contains the equipment operating frequencies.

    • Clarify that equipment’s measurement shall be performed only with the carrier frequency set at the lowest frequency and highest frequency in each frequency bands.

    • Add guidance on determining the occupied bandwidth when measuring frequency stability limits for equipment able to transmit numerous channels simultaneously.

    • Remove measurement section on multiple antennas since the measurement method is defined in ANSI C63.26, American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Service (referenced in RSS-Gen, General Requirements for Compliance of Radio Apparatus).

    Full text in English can be download here:

    https://www.ic.gc.ca/eic/site/smt-gst.nsf/vwapj/RSS-130-i2-2019-02EN.pdf/$FILE/RSS-130-i2-2019-02EN.pdf

    Full text in French can be download here:

    https://www.ic.gc.ca/eic/site/smt-gst.nsf/vwapj/RSS-130-i2-2019-02FR.pdf/$FILE/RSS-130-i2-2019-02FR.pdf


  • Canada Updates Regulation for Vehicular Radars

    Canada has released two updated Radio Standards Specifications (RSS) for vehicular radars:

    Comments can still be submitted via the Gazette Notice SMSE-012-18. French versions are available on-site as well.



Produktumfang

Automotive

Radar
(24GHz, 77GHz, 79GHz, UWB)

Funkschlüssel
(315MHz, 433MHz, 868MHz)

Keyless Go
(125kHz, 13,56MHz)

Reifendrucksensoren
(125kHz, 315MHz, 433MHz, 868MHz)

Entertainment
(2,4GHz)

Industrie

Radar
(Tank Level, Positions-Radar)

Wireless-M-Bus
(315MHz, 433MHz, 868MHz)

Wireless-CAN-Bus
 

RFID
(125kHz, 13,56MHz, 868MHz)

UWB Devices
(24GHz, 60GHz, 79GHz)

Consumer Elektronik

WirelessHD
(60GHz)

WLAN
(2,4GHz, 3GHz, 5GHz, 10GHz)

Bluetooth
(2,4GHz)

Zigbee
(868MHz, 2,4GHz)

Label Beispiel für Canada

Beispiel Funk-Zulassungslabel für Canada
Download Label
PDF / PNG



Kennzeichnung des Zertifizierungs-Logos oder der Zertifizierungs-Nummer erforderlich?
Ja

Größe
(n/a)

Bestimmte Anforderungen im Handbuch?
Nein

Safety Information for Canada

Type A Plug
Type A Sock Type A Plug Type A Sock
Netzspannung
120V

Netzfrequenz
60Hz
Description
The Type A electrical plug (or flat blade attachment plug) is an ungrounded plug with two flat parallel pins. Although the American and Japanese plugs appear identical, the neutral pin on the American plug is wider than the live pin, whereas on the Japanese plug both pins are the same size. As a result, Japanese plugs can be used in the US but often not the other way around. The pins on Type A and Type B plugs have a hole near the tip that fits into ‘bumps’ found on the contact wipers of some sockets, so that the pins are gripped more tightly allowing for better contact and also to prevent the plug from slipping out of the socket. Some sockets have spring-action blades that grip the sides of the pins, making the holes obsolete.
Type B Plug
Type B Sock Type B Plug Type B Sock
Netzspannung
120V

Netzfrequenz
60Hz
Description
The Type B electrical plug has two flat parallel pins and a round grounding (or earth) pin. The earth pin is longer than the other two so that the device is grounded before the power is connected. As with the type A plugs, the American and Japanese versions vary slightly. Type B plugs are rated at 15 amps.

Kontakt

J. Untersteller
Type Approval Expert Canada
Kontaktieren Sie mich jederzeit!
C. Marx
Type Approval Expert Canada
Kontaktieren Sie mich jederzeit!
Diese Website verwendet nur die notwendigsten Cookies. Bitte akzeptieren Sie Cookies auf dieser Seite, sodass wir unsere Webseite optimal für Sie gestalten und fortlaufend verbessern können. Weitere Informationen zu Cookies und deren Widerspruch finden Sie in unserer Datenschutzerklärung