Worldwide Homologation
Type Approval Specialists
Click here to check our Live Map for the global COVID-19 impact on authorities and type approval processes. IB-Lenhardt AG is fully operational and available for you.


Denmark

Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions

We can offer you reliably all services concerning Type Approval in Denmark (Copenhagen). Our distinguished contact with the authority in Denmark (Copenhagen), our good relationship to National Agency of Telecommunication, as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Denmark trouble-free and cost-effective.

We will assist you to put your product successfully on the market by offering the following services:

  • Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
  • Provide pre-compliance testing during the design and development phase to determine compliance
  • Assist in completion of applications and other required forms
  • Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
  • Handle entire submittal process including working with local testing and certification organizations
  • Arrange for initial factory inspections that are required before certification issuance
  • Coordinate verification testing on qualified products as needed
  • Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
  • Support renewal maintenance of certificates as needed
  • User manual translation service when needed


For Denmark we can offer you a short termed tentative offer based upon a submitted Datasheet of the device:
quote@ib-lenhardt.de



GEO / MAP of Denmark


General information about Denmark

Formal Name
Denmark


Capital
Copenhagen


Continent
Europe


Degree of latitude
55.89847700075279


Degree of longitude
10.980297701806636


Currency
Danish Krone


Country code
+ 45


Top-level domain
.dk


Languages
Danish, Faeroese, Greenlandic (an Inuit dialect), German speaking minority


Size (in km²)
43,094.0 km²


Population (as of 2011)
5574000 Einwohner


Date of joining the UN
24.10.1945


Country code according to ISO 3166-2
DK


Country code according to ISO 3166-3
DNK


Label Example for Denmark

Example Radio Type Approval Label for Denmark
Download Label
PDF / PNG



Marking of Certification Logo or Number Required?
Yes

Size
5 mm

Specific User Manual Requirements?
Yes

Product scope

Automotive

Radar
(24GHz, 77GHz, 79GHz, UWB)

Funkschlüssel
(315MHz, 433MHz, 868MHz)

Keyless Go
(125kHz, 13,56MHz)

Reifendrucksensoren
(125kHz, 315MHz, 433MHz, 868MHz)

Entertainment
(2,4GHz)

Industrie

Radar
(Tank Level, Positions-Radar)

Wireless-M-Bus
(315MHz, 433MHz, 868MHz)

Wireless-CAN-Bus
 

RFID
(125kHz, 13,56MHz, 868MHz)

UWB Devices
(24GHz, 60GHz, 79GHz)

Consumer Elektronik

WirelessHD
(60GHz)

WLAN
(2,4Ghz, 3GHz, 5GHz, 10GHz)

Bluetooth
(2,4GHz)

Zigbee
(868MHz, 2,4GHz)

Safety Information for Denmark

Type C Plug
Type C Sock Type C Plug Type C Sock
Netzspannung
230V

Netzfrequenz
50Hz
Description
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
Type F Plug
Type F Sock Type F Plug Type F Sock
Netzspannung
230V

Netzfrequenz
50Hz
Description
The Type F electrical plug (also known as a Schuko plug) has two 4.8 mm round pins spaced 19 mm apart. It is similar to the Type E plug but has two earth clips on the side rather than a female earth contact. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type F plugs are rated 16 amps.
Type E Plug
Type E Sock Type E Plug Type E Sock
Netzspannung
230V

Netzfrequenz
50Hz
Description
The Type E electrical plug has two 4.8 mm round pins spaced 19 mm apart and a hole for the socket’s male grounding pin. The Type E socket is different to the Type F socket which is standard in other continental European countries, such as Germany. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type E plugs are rated 16 amps.
Type K Plug
Type K Sock Type K Plug Type K Sock
Netzspannung
230V

Netzfrequenz
50Hz
Description
The Type K plug has two round pins as well as a grounding pin. It is similar to Type F, the difference being that Type F has grounding clips instead of a grounding pin. Type C plugs are perfectly compatible with Type F sockets. Type E plugs and sockets are also used in Denmark.
This website only uses the most necessary cookies to enhance your browsing experience. Please accept the use of cookies on this site, to allow us improving the site for you. You will find more information about cookies in the Privacy Statement