Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions
We can offer you reliably all services concerning Type Approval in EU (other directives) (). Our distinguished contact with the authority in EU (other directives) (), our good relationship to CEPT, as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in EU (other directives) trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
Provide pre-compliance testing during the design and development phase to determine compliance
Assist in completion of applications and other required forms
Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
Handle entire submittal process including working with local testing and certification organizations
Arrange for initial factory inspections that are required before certification issuance
Coordinate verification testing on qualified products as needed
Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
Support renewal maintenance of certificates as needed
User manual translation service when needed
For EU (other directives) we can offer you a short termed tentative offer based upon a submitted Datasheet of the device: email@example.com
Marking of Certification Logo or Number Required?
Specific User Manual Requirements?
News for EU (other directives)
Main changes Safety Standard IEC EN 62368-1 in edition 3
Already on November 11th, 2018 we have published the news with respect to the edition 3 of the new European Safety Standard IEC EN 62368-1. The following summary abstracts the main changes compared to the second edition:
Within IEC 62368-1 ed.2, the requirements for outdoor enclosures relied on IEC 62950-22. Since the IEC 60950-1 is superseded by IEC 62368-1, the next step was to eliminate the dependency to IEC 60950-22 and integrated the requirements into edition 3 of IEC 62368-1.
Thus, all equipment under test having an outdoor enclosure, will be subjected to the appropriate tests. There are tests concerning resistance to UV radiation and corrosion; suitability of gaskets; protection from moisture, excessive dust, plants and vermin; mechanical strength of enclosures at low temperatures.
With respect to the requirements for optical energy sources, IEC 62368-1 ed.2 included laser, lamps and LEDs. Edition 3 refines these requirements to suite the new needs. For lasers, their corresponding product standards are stated, such as IEC 60825-1, -2, and -12. Lamps and lamp systems (including LEDs) are evaluated pursuant to IEC 62471:2006. As a new addition, image projectors (beamers) are as well.
Besides the old requirements which classified the maximum sound pressure only, now analogue and digital output requirements were added. As a possible second approach, a dose based measurement is introduced. The value for the calculated sound dose (CSD) is based on the EU Commission Decision 2009/490/EC, which describes a safe zone of sound below 80 dB(A) per 40h. Though both approaches can be used side by side, the dose base measurement may replace the sound pressure measurement in the future.
Special requirements for wireless power transmitters (Qi, Powermat, etc.) are introduced for the first time. During the test sequence, it is examined, if a metallic foreign object can keep its cold, where placed in the field. Throughout the test, it shall not exceed 70°C in order to pass the test.
Source: IEC EN 62368-1
New Edition for EN 60601-1-2 Medical Devices
The Fourth Edition of EN 60601-1-2:2015 cancels and replaces the Third Edition of EN 60601-1-2:2007 (which expires on 2018-12-31). It constitutes a technical revision of the latter.
The most significant changes with respect to the previous edition are stronger requirements for electromagnetic disturbances.