Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions
We can offer you reliably all services concerning Type Approval in Montenegro (Podgoricaa). Our distinguished contact with the authority in Montenegro (Podgoricaa), our good relationship to Department for Electronic Communications and Post, as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Montenegro trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
Provide pre-compliance testing during the design and development phase to determine compliance
Assist in completion of applications and other required forms
Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
Handle entire submittal process including working with local testing and certification organizations
Arrange for initial factory inspections that are required before certification issuance
Coordinate verification testing on qualified products as needed
Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
Support renewal maintenance of certificates as needed
User manual translation service when needed
For Montenegro we can offer you a short termed tentative offer based upon a submitted Datasheet of the device: firstname.lastname@example.org
Marking of Certification Logo or Number Required?
Specific User Manual Requirements?
News for Montenegro
CE Marking Accepted (for EMC and R&TTE)
As of 2013-01-01, Montenegro's Ministry of Telecommunication and Information Society will accept CE marked products for EMC and R&TTE.
This new regulation (Official Gazette, No. 53/11) was published in the Montenegrian language on 2012-06-22. It will allow for products bearing the CE Mark to be imported into Montenegro without further Type Approval.
Additional requirements are as follows: The manufacturer or dealer in Montenegro must
affix the CE mark to the device,
provide the User Manual in the Montenegrin language,
provide information on equipment specifications, information on the types of interfaces on which the equipment can be connected,
provide a warning about possible limits the use of radio equipment and / or the need to obtain required permission for the use of radio frequency spectrum and
provide a signed Declaration of Conformity (DoC) with essential requirements. In particular, the DoC must provide
information about the device to which it relates, provided for in Article 11 paragraph 4 of the Ordinance;
name and address of the manufacturer and the name and address of its agent;
a list of standards which the equipment has been tested to;
the DoC date of issuance;
name and signature of the person authorized by the manufacturer, his authorized representative or the person responsible for placing the equipment on the market.
If the R&TTE equipment falls outside of a EU-harmonized radio frequency range or is not in accordance with the frequency spectrum plan, the supplier must provide notification to the Ministry at least 30 days before placing the equipment on the market.
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
The Type F electrical plug (also known as a Schuko plug) has two 4.8 mm round pins spaced 19 mm apart. It is similar to the Type E plug but has two earth clips on the side rather than a female earth contact. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type F plugs are rated 16 amps.