Homologation mondiale
Spécialistes en homologation
Tél.: +49 6894 38938-0
Fax: +49 6894 38938-99

01/2020: IB-Lenhardt AG offers new service

Bluetooth® Qualification Services

All products that use Bluetooth® must complete the Bluetooth Qualification Process.

Completing the Qualification process allows you to use the Bluetooth Technology, Trademark and Bluetooth Logo.

You are not sure how to comply with the requirements and how to complete the qualification process for your end product, module or Bluetooth stack?

IB-Lenhardt AG newly offers qualification services by our experienced Bluetooth Qualification Consultant (BQC),recognized by the Bluetooth SIG.

Our BQC will guide you from the beginning of your project through the complete process and includes the following services:

  • Consultancy
  • Definition of Qualification and Testing Requirements
  • Project support in Launch Studio
  • Test Plan Generation
  • Test Declaration Upload
  • Compliance Folder Review
  • Declaration Fee payment to the Bluetooth SIG (optional)
  • Design / Product Listing(s)

 

Bluetooth® Testing Services

Whether you are developing a Bluetooth® product from scratch or you are integrating pre-qualified designs—it may result in different testing requirements, depending on the product types as defined by the Bluetooth SIG.

Our BQC will help you to identify those requirements and IB-Lenhardt AG will take care about the necessary testing services:

  • RF Testing (BR/EDR)
  • RF-PHY Testing (Bluetooth Low Energy)
  • Protocol Testing (Host layers, e.g. for BlueZ)
  • Profile Testing (with PTS)

 

Bluetooth® News


  • Bluetooth Core Specification Version 5.2 released

    Feature Overview (3/3)

    LE Isochronous Channels

    This feature, which was primarily designed to support LE Audio, the next generation of Bluetooth audio, allows the communication of time-bound data to one or more devices for time-synchronized processing. It can be used over connections or be broadcast to an unlimited number of devices in a connectionless fashion. 

    New use cases and topologies are made possible by LE Isochronous Channels. An audio source can transmit audio for synchronized playback by small, private groups of devices (personal audio sharing) or to large collections of devices of unlimited sizes in public spaces, such as cinemas. 

    LE Audio, built on top of the new LE Isochronous Channels, will offer a new standard for hearing aids and support assisted hearing systems in diverse locations, such as theaters, conferences, lecture halls, and airports.


  • Bluetooth Core Specification Version 5.2 released

    Feature Overview (2/3)

    LE Power Control

    The new LE Power Control makes it possible for devices to dynamically optimize the transmission power used in communication between connected devices. Bluetooth LE receivers may now monitor signal strength and request transmission power-level changes in connected devices, typically to maintain an optimal signal strength from both a signal quality and low- power-use perspective. 

    Benefits of the LE Power Control feature include: 1. The reduction of overall power consumption by transmitters through dynamic power management conducted between connected devices. 2. Improvements in reliability through the active maintenance of receiver signal strength so that it stays within the optimal range supported by the receiver. 3. Improvements relating to coexistence with other wireless devices that are in the environment and are using the 2.4 GHz frequency range. This benefit applies to all such devices, not just those that are using Bluetooth.


  • Bluetooth Core Specification Version 5.2 released

    Feature Overview (1/3)

    Enhanced Attribute Protocol (eATT)
    An improved version of the Attribute protocol (ATT),called the Enhanced Attribute protocol (EATT),has been introduced along with some associated improvements to the Generic Attribute Profile (GATT)

    EATT supports concurrent transactions, allows the interleaving of L2CAP packets relating to ATT packets from different applications, and allows the ATT Maximum Transmission Unit (MTU) to be changed during a connection. Collectively, these changes can provide an improved user experience on devices where there are multiple applications using the Bluetooth Low Energy (LE) stack at the same time, through reducing instances where one application’s use of the stack temporarily blocks that of another. This can reduce the end- to- end latency of one or more of the applications and improve the user’s experience of responsiveness.

    In support of EATT, a new L2CAP mode has been defined. The new mode is called the L2CAP Enhanced Credit Based Flow Control Mode. This mode provides flow control and so allows applications to regard the protocol as reliable. EATT has security advantages over unenhanced ATT as it may only be used over an encrypted connection.


  • New Test Case Reference List - TCRL (2019-2) released

    What is new?

    Beside of several new test cases which become mandatory to be performed after the active date, the Bluetooth SIG included now an overview about the „Expedited Errata TS&ICS Impact“.
    This sheet informatively summarizes the qualification requirement changes and additions connected to the expedited specification erratum as defined when first qualifiable. 
    All affected tests are listed here and if this testing is applicable to your product is depending on the supported features (ICS).
    Our Bluetooth Qualification Consultant (BQC) will help you to identify the mandatory requirements to ensure full compliance to the Bluetooth Specifications and Qualification requirements for your Bluetooth product.


  • What is a Bluetooth Qualification Consultant (BQC)?

    Bluetooth® Qualification Consultants (BQC) are independent consultants who have met certain requirements and are allowed to call themselves “Bluetooth Qualification Consultants”.
    The BQC assists members with submission of their products for qualification to meet all requirements.


    Each Bluetooth Qualification Consultant must pass an exam designed to assess their understanding of the Bluetooth Qualification Process to satisfy all program requirements.

    Examples of services that our Bluetooth Qualification Consultant will provide are:

    • Consultancy
    • Definition of Qualification and Testing Requirements
    • Project support in Launch Studio
    • Test Plan Generation
    • Test Declaration Upload
    • Compliance Folder Review
    • Declaration Fee payment to the Bluetooth SIG (optional)
    • Design / Product Listing(s)


The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license. Other trademarks and trade names are those of their respective owners.

This website only uses the most necessary cookies to enhance your browsing experience. Please accept the use of cookies on this site, to allow us improving the site for you. You will find more information about cookies in the Privacy Statement